All the structural materials of the battery buckle hardware and battery spring can only be made of one kind of material. It is mainly made of metal sheets that are punched and bent by a stamping machine. The cost is high and the process is cumbersome. The main materials used for battery shrapnel are manganese steel, phosphor copper, beryllium copper, stainless steel 3/3 and other materials. They have high dimensional accuracy, good elasticity, and electrical conductivity. 3. The battery shrapnel is an important part of the battery and is made of copper, iron, stainless steel and other materials. Electroplating, silver, nickel. When the battery spring piece installed on the conductive film is pressed, the center point of the spring piece contacts the B plate to form a loop, and current passes through. It has the characteristics of strong conductivity and good hand feel. Battery shrapnel production is a special process of processing materials (metal or non-metal) into parts (or semi-finished products) through cold stamping processing of stamping dies. Stamping is a pressure processing method that uses a mold installed on a press to apply pressure to the material at room temperature to cause separation or plastic deformation to obtain the required parts.
Our company, Shenzhen Xunjieyuan Technology, was established in 2008. After many years of focusing on batteries, 3 battery hardware shrapnel, etc., we have achieved important results in batteries and battery hardware shrapnel. Battery shrapnel is mainly used in battery buckles, lighting, telephones, plush toys, and electric toys. Anti-theft products, radios, digital cameras, lithium batteries, electronic dictionaries, ordering machines, and various small electronic products.
Environmentally friendly battery shrapnel CR2032 battery buckle 2032 complies with ROHS standards